Advice on Hubs
-
- Posts: 41
- Joined: Sun Jul 29, 2018 10:11 am
Advice on Hubs
Postby stomach_bug » Wed Aug 22, 2018 9:02 pm
Hoping for some advice on hubs - posted my latest project on the ''post your beauty' sticky, hoping for some specific advice on hubs for new wheels!
Here's the patient, a stunning 1989 Malvern Star triathlete:
Triple butted cromoly frame, used for about 50-100km a week for trips to work, errands and as a general 'if it's within 15km and I don't need to carry 15kg I'll ride' type bike, often on mediocre Melbourne roads. I'm hoping for it to be a forever-type bike, and training myself to maintain and keep it once it's in a state to handle that job. I'm aiming to build it to a standard that it'll outlast me.
The since the photo was taken she's had a new sealed bearing headset installed, replaced saddle with my old brooks, replaced the tyres with some conti gp 4000 II's and a through clean and re-grease of hubs and BB along with rust treatment on most loose parts. She's riding a treat but there's more to do and I need some advice:
It's come time for the nitty gritty of her transformation: I'm aiming to bring her in to the modern age with an 11 speed silver campy centaur groupset and some new wheels (don't worry vintage nuts, I'm saving all the parts should I want her back in original shape!! ).
I have my eye on H Plus Son Archetype rims with DT swisse champ spokes and am in need of advice on hubs - I've been looking at velo orange grand cru 36h hubs (https://velo-orange.com/collections/hub ... cing-11s-1. They'll look the part, fitting the silver/white look I'm after but I'm having some trouble working out whether or not there are other, better options out there that I'm missing, short of phil wood's $20million dollar offerings.
This post has been a longwinded way of asking - Has anyone encountered nice, long lasting vintage-looking sealed and/or cartridge hubs?
I'll happily take advice on my project as well!
Thanks in advance,
'Bug
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Thu Aug 23, 2018 6:25 am
https://velo-orange.com/collections/hub ... peed-130mm
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Thu Aug 23, 2018 6:58 am
which also come in silver, just didn't see a pic in silver.
http://www.whiteind.com/t11
-
- Posts: 41
- Joined: Sun Jul 29, 2018 10:11 am
Re: Advice on Hubs
Postby stomach_bug » Thu Aug 23, 2018 7:54 am
my bad - meant to link that one!!10speedsemiracer wrote:Think you'll be better off with the non-disc, 130mm version for that frame :
https://velo-orange.com/collections/hub ... peed-130mm
10speedsemiracer wrote:Or the White Industries T11 :
which also come in silver, just didn't see a pic in silver.
http://www.whiteind.com/t11
ouch - about AUD$400 for just the rear hub. are they that much of an improvement over the $200 velo orange?
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Thu Aug 23, 2018 8:28 am
The VO stuff is good quality, and I was also thinking that some of the Velocity hubs would be cool but I don't think they do Campag (just Shimano/SRAM)...
...here's their website if you feel like having a look around :
http://www.velocityusa.com/product/hubs/road-rear-hub
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Thu Aug 23, 2018 8:32 am
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Thu Aug 23, 2018 9:12 am
http://sunxcd.net/hubs/
Note that there's buggerall difference between 10 and 11 sp hubs
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Thu Aug 23, 2018 9:56 am
Funnily enough my first thought was something SunTour but the Campy 11sp put paid to that. These look very tasty.Thoglette wrote:Also look at SunXCD (decended from SunTour)
http://sunxcd.net/hubs/
Note that there's buggerall difference between 10 and 11 sp hubs
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Thu Aug 23, 2018 11:41 am
Very tasty. They claim campy/shimano options for the 130mm hub.10speedsemiracer wrote:Funnily enough my first thought was something SunTour but the Campy 11sp put paid to that. These look very
tasty.
The umours "out there" suggest that the campy and shimano 11sp are so damn similar that either will work anyway.
I've been running a bunch of shimergo combinations (e.g. Old campag RD with new Campy shifters and Shimano 10sp cassette) and some work really well. It takes quite a bit of mismatch to start making funny noises/misshifts - about the same as using 7sp shifter on 8sp cassettes (ask me how I know
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
- familyguy
- Posts: 8392
- Joined: Wed Apr 16, 2008 2:30 pm
- Location: Willoughby, NSW
Re: Advice on Hubs
Postby familyguy » Thu Aug 23, 2018 1:17 pm
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Thu Aug 23, 2018 2:19 pm
Which you should be able to chew up with the lock ring...familyguy wrote:Campy 11s is 1.3mm wider
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
- familyguy
- Posts: 8392
- Joined: Wed Apr 16, 2008 2:30 pm
- Location: Willoughby, NSW
Re: Advice on Hubs
Postby familyguy » Thu Aug 23, 2018 2:41 pm
-
- Posts: 41
- Joined: Sun Jul 29, 2018 10:11 am
Re: Advice on Hubs
Postby stomach_bug » Thu Aug 23, 2018 10:50 pm
Thanks so much for the tip! I'm still leaning towards the velo orange, they seem to hit the sweet spot for looks/price/reliability/compatibility (reading a few reviews).10speedsemiracer wrote:Actually, thinking about it, I think the Velo Orange hubs would be ideal. Velo Cycles in Carlton are agents for VO if you don't feel like waiting for shipping. Whether they have anything in stock, I do not know.
Now these are nice, but at $50 more than the velo orange are they worth it?Thoglette wrote:Also look at SunXCD (decended from SunTour)
http://sunxcd.net/hubs/
Note that there's buggerall difference between 10 and 11 sp hubs
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Thu Aug 23, 2018 11:06 pm
If you have to ask the question, the answer is "no".stomach_bug wrote:Now these are nice, but at $50 more than the velo orange are they worth it?
Aesthetically, there's no comparison. The Velo Orange are "nice enough" but the SunXCD are almost swoon-worthy (the RD definitely is). And they are positively cheap compared to NOS "collectables".
Whether one can justify spending that sort of $$ is another thing altogether.
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
-
- Posts: 41
- Joined: Sun Jul 29, 2018 10:11 am
Re: Advice on Hubs
Postby stomach_bug » Fri Aug 24, 2018 10:42 pm
Thoglette wrote:If you have to ask the question, the answer is "no".stomach_bug wrote:Now these are nice, but at $50 more than the velo orange are they worth it?
Aesthetically, there's no comparison. The Velo Orange are "nice enough" but the SunXCD are almost swoon-worthy (the RD definitely is). And they are positively cheap compared to NOS "collectables".
Whether one can justify spending that sort of $$ is another thing altogether.
Reasonable!!
I watched a vlog today of a fellow with the sunxcd's, looks like he at least had a mechanical failure with them. I'll save the money for some good quality cable sleeves and go with the velo's I rekon! Not exactly scientific but without anything else to go on it's tricky.
Thanks so much everyone!
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Sat Aug 25, 2018 7:09 pm
One vlogger?stomach_bug wrote:I watched a vlog today of a fellow with the sunxcd's, looks like he at least had a mechanical failure with them.
I'll keep my salt-shaker handy: SunXCD is run by an ex-president of Suntour, so he should know what he's doing. Never less, new products always have their challenges in the first production run.
I'm in the middle of convincing myself that the RD is better value than a c. 2000 DuraAce long cage RD, so I'm biased.
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
-
- Posts: 41
- Joined: Sun Jul 29, 2018 10:11 am
Re: Advice on Hubs
Postby stomach_bug » Sat Aug 25, 2018 8:40 pm
Thoglette wrote:One vlogger?stomach_bug wrote:I watched a vlog today of a fellow with the sunxcd's, looks like he at least had a mechanical failure with them.
I'll keep my salt-shaker handy: SunXCD is run by an ex-president of Suntour, so he should know what he's doing. Never less, new products always have their challenges in the first production run.
I'm in the middle of convincing myself that the RD is better value than a c. 2000 DuraAce long cage RD, so I'm biased.
As I said, it's not a scientific approach but I can only go on what I can find. Learned the hard way over time not to pay attention to brand names, doubly so when they're expensive!
It's a shame nobody stocks it that I can see online - I'm a fan of having it in my hands before I buy
-
- Posts: 5
- Joined: Tue Aug 28, 2018 4:44 pm
Re: Advice on Hubs
Postby Jonda500 » Fri Aug 31, 2018 2:52 pm
I have just found an unusual 5 speed cassette style steel rear hub after taking apart an old chrome 27" wheel I removed from an old ten speed racer parts bike.
Sorry I haven't mastered the art of using photo hosting sites yet, I will have to describe it with words instead. It is larger diameter than normal with weight saving holes drilled (like is common in front hubs). The non drive side has the bearings inside the spoke flange like a front wheel hub but the drive side has them outside like normal (so the drive side spokes are 3mm shorter!). The cassette consists of 4 splined sprockets in a bundle held on by the 5th sprocket which screws onto the outside of the freewheel spline. It looks like there is enough length left of the freewheel splines to screw on a sixth sprocket. The splines have no master spline (one smaller) like modern ones, instead they are all equal. Anyone know of any of these 5/6 speed cassettes available to buy? The one I have is standard 14-28 - I would like a more wide range setup with at least a 32T 1st and would then customise 2nd 3rd and 4th's sizes. (I have seen 40T sprockets available but only in the modern master spline type.)
Thanks in advance for any replies. Sorry for the long winded post and for hijacking the OP's thread...
John
- Thoglette
- Posts: 6628
- Joined: Thu Feb 19, 2009 1:01 pm
Re: Advice on Hubs
Postby Thoglette » Fri Aug 31, 2018 3:48 pm
Ok, questions:Jonda500 wrote:The cassette consists of 4 splined sprockets in a bundle held on by the 5th sprocket which screws onto the outside of the freewheel spline. It looks like there is enough length left of the freewheel splines to screw on a sixth sprocket. The splines have no master spline (one smaller) like modern ones, instead they are all equal.
1. can you see a brand name anywhere? (e.g. Shimano)
2. how many splines? (e.g. 9 for Shimano, 4 for Sun Tour)
But I'll put a beer on it being Shimano Uniglide
(Sheldon again)
If it is, you have a range of options, as it's almost the same as modern 7/8 speed stuff.
However, there was a wide range of freewheels which had one or more screw on sprockets holding on a pile of splined sprockets, so YMMV
E.g. Suntour had three different ones - here's a "perfect" body
(Sheldon again)
Photos would be really good. Put them on imagur or similar
"People are worthy of respect, ideas are not." Peter Ellerton, UQ
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Advice on Hubs
Postby 10speedsemiracer » Fri Aug 31, 2018 4:02 pm
- P!N20
- Posts: 4053
- Joined: Thu Jul 22, 2010 6:50 pm
- Location: Wurundjeri Country
-
- Posts: 5
- Joined: Tue Aug 28, 2018 4:44 pm
Re: Advice on Hubs
Postby Jonda500 » Fri Aug 31, 2018 4:39 pm
The cassette hub is actually standard dimensions and style with Shimano Japan stamped on it:
The unusual dimensions hub has nothing stamped on it anywhere! Is this a rare hub?
Thanks Thoglette, looks like it's a uniglide, will modern cassette sprockets fit these splines?
John
-
- Posts: 5
- Joined: Tue Aug 28, 2018 4:44 pm
Re: Advice on Hubs
Postby Jonda500 » Fri Aug 31, 2018 4:43 pm
-
- Posts: 2842
- Joined: Fri Apr 17, 2009 9:44 pm
- Location: Middle East, Melbourne
Re: Advice on Hubs
Postby ironhanglider » Fri Aug 31, 2018 10:21 pm
Cheers,
Cameron
- uart
- Posts: 3214
- Joined: Sat Jan 02, 2016 9:15 pm
- Location: Newcastle
Re: Advice on Hubs
Postby uart » Sat Sep 01, 2018 3:03 pm
John they don't fit without modification due to the one narrow (alignment) spline on the newer Shimano cassettes.Jonda500 wrote:Looks like it's a uniglide, will modern cassette sprockets fit these splines?
John
If however you drill out the three rivets and disassemble to individual cogs, then its a very simple job with a file to widen the one narrow spline to make them fit. Seriously, I do this all the time to keep my retro rides supplied with new cogs as they wear out. I just use the edge of a regular sized flat file, and each cog takes about 1 minute to modify.
In my case I'm just using them with old non indexed systems and the alignment is irrelevant to me. This also means that I can mix and match cogs as I please (to make custom arrangements for whatever terrain I'll be riding). If you're using indexing however, you probably should mark each of the narrow splines with a center punch mark before filing, so as to maintain alignment when assembling onto the freewheel.
BTW, you don't need to replace the rivets. The freehub holds everything in place.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.