25.4 handlebar into a 31.8 stem, possible options?

[applio]

Hi guys, I recently purchased a bullhorn handlebar for my fixes, however my bike comes with a 31.8 stem, what sort of possible solution I can do to fit the 25.4 handlebar? New stem or shims?


Sent from my iPhone using Tapatalk

[TDC]

Either will do the job. Shims are probably cheaper.

http://store.velo-orange.com/index.php/ ... -rise.html" onclick="window.open(this.href);return false;

http://www.velogear.com.au/bike-parts/b ... 1-8mm.html" onclick="window.open(this.href);return false;

[mitchy_]

i've got a set of these shims you can have for $10.

[applio]

i've got a set of these shims you can have for $10.

Wher u located?


Sent from my iPhone using Tapatalk

[mitchy_]

Gold Coast. Should cost a couple of dollars to post.

[applio]

Either will do the job. Shims are probably cheaper.

http://store.velo-orange.com/index.php/ ... -rise.html" onclick="window.open(this.href);return false;

http://www.velogear.com.au/bike-parts/b ... 1-8mm.html" onclick="window.open(this.href);return false;

Thx will look into that


Sent from my iPhone using Tapatalk

[just4tehhalibut]

Otherwise Clickbike.com.au has some Problem Solvers shims going for $8 plus postage.

[MattyK]

Just buy a new stem. Happy to donate one to you if it fits (stack height ~45mm I think, 110mm long 17?° rise)

[coyote]

I had the same problem, had shims to start with then did this.