Ricardo Appreciation Society
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ricardo Appreciation Society
Postby singlespeedscott » Wed Jun 12, 2019 11:44 am
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Ricardo Appreciation Society
Postby 10speedsemiracer » Wed Jun 12, 2019 12:30 pm
Made by Leisure Cycles in Regency Park (suburb of Adelaide) from mostly Tange tubing for mid-range and high-end frames. Sold to Repco at some point in the late 80s. I think they have quite a following due to the combination of being Australian-made and the overall good quality of the better models. Have had various Ricardos thru my hands (but am far from an expert) and all have been very well made and aged surprisingly well. I don't know if applying the Japanese frame dating criteria would be accurate to Ricardo frames..guidogad wrote:Just cross read this whole thread and couldn't find what I was looking for (may have missed it though).
Is it known who manufactured the Ricardo frames?
..........
- familyguy
- Posts: 8395
- Joined: Wed Apr 16, 2008 2:30 pm
- Location: Willoughby, NSW
Re: Ricardo Appreciation Society
Postby familyguy » Wed Jun 12, 2019 1:50 pm
-
- Posts: 50
- Joined: Wed Jan 23, 2008 4:28 pm
- Location: Perth
Re: Ricardo Appreciation Society
Postby guidogad » Wed Jun 12, 2019 4:17 pm
That's a real surprise. I would have assumed they just imported (maybe assembled) Asian frames.singlespeedscott wrote:Ricardo's where manufactured by Leisure cycles in Adelaide
This is not to say that there weren't any (artisan) frame builders around (like Geoff Scott at Clamont), but I didn't think there was any industrial scale manufacturing of bike frames happening in Australia during the 80s.
P.S.: I absolutely love my 1981 Apollo V (made by Kuwahara of course).
-
- Posts: 50
- Joined: Wed Jan 23, 2008 4:28 pm
- Location: Perth
Re: Ricardo Appreciation Society
Postby guidogad » Wed Jun 12, 2019 4:56 pm
One learns something every day.
Anyone know how long they kept it up?
- 10speedsemiracer
- Posts: 4904
- Joined: Sat Feb 11, 2017 7:38 pm
- Location: Back on the Tools .. when I'm not in the office
Re: Ricardo Appreciation Society
Postby 10speedsemiracer » Wed Jun 12, 2019 5:10 pm
I seem to remember 86-87 as when Repco acquired Ricardo, but may be out by a year or so.guidogad wrote:Ok, just found a 1982 ad for the Ricardo Elite, which says the frame and fork are brazed in Australia.
One learns something every day.
Anyone know how long they kept it up?
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ricardo Appreciation Society
Postby singlespeedscott » Thu Jun 13, 2019 8:51 am
Please shareguidogad wrote:Ok, just found a 1982 ad for the Ricardo Elite, which says the frame and fork are brazed in Australia.
One learns something every day.
Anyone know how long they kept it up?
-
- Posts: 50
- Joined: Wed Jan 23, 2008 4:28 pm
- Location: Perth
Re: Ricardo Appreciation Society
Postby guidogad » Thu Jun 13, 2019 9:14 am
I don't have a photo hosting service, so I guess I can't upload anything. Looks like I can't even attach anything to a PM.singlespeedscott wrote:Please shareguidogad wrote:Ok, just found a 1982 ad for the Ricardo Elite, which says the frame and fork are brazed in Australia.
One learns something every day.
Anyone know how long they kept it up?
Also, the "coding" one has to do to do anything in this forum is probably too high a hurdle for me.
I can post it at bikeforums.net if you participate there?
- uart
- Posts: 3214
- Joined: Sat Jan 02, 2016 9:15 pm
- Location: Newcastle
Re: Ricardo Appreciation Society
Postby uart » Thu Jun 13, 2019 11:18 am
Hi guidogad. Do you have a google account (eg gmail). If so then you can use "google photos" already, no new accounts or services needed. Anything uploaded to a shared folder (album) in google photos will get you a link which will work just fine here.guidogad wrote:I don't have a photo hosting service, so I guess I can't upload anything. Looks like I can't even attach anything to a PM.
Also, the "coding" one has to do to do anything in this forum is probably too high a hurdle for me.
I can post it at bikeforums.net if you participate there?
As for the amount of "coding" required, the only the following computer skills are needed.
1. Clicking. (To click the "Img" button at the top of the "reply to post" page).
2. Pasting. (To paste the image URL sourced from google photos - or other hosting service - into the reply.
There is some more help here. http://www.bicycles.net.au/forums/viewt ... =6&t=23303
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ricardo Appreciation Society
Postby singlespeedscott » Thu Jun 13, 2019 12:19 pm
even a link to where you found it would be greatguidogad wrote:I don't have a photo hosting service, so I guess I can't upload anything. Looks like I can't even attach anything to a PM.singlespeedscott wrote:Please shareguidogad wrote:Ok, just found a 1982 ad for the Ricardo Elite, which says the frame and fork are brazed in Australia.
One learns something every day.
Anyone know how long they kept it up?
Also, the "coding" one has to do to do anything in this forum is probably too high a hurdle for me.
I can post it at bikeforums.net if you participate there?
-
- Posts: 11
- Joined: Tue Oct 13, 2009 12:11 am
Re: Ricardo Appreciation Society
Postby fatti » Wed Aug 28, 2019 5:14 pm
I remember when it came out it was state of the art with the oval front cog and the concave rims. Man I did some miles on that thing.
-
- Posts: 2
- Joined: Wed Nov 20, 2019 2:23 pm
Re: Ricardo Appreciation Society
Postby Gravybaby » Wed Nov 20, 2019 3:16 pm
It came with CR-MO Tange PG Tubing, 18 Speed indexed gearing (indexed gears were perhaps a new selling point at the time?), 26 inch concave alloy rims (but crappy steel spokes that rusted), thorn proof innertubes, I changed one of the rims after breaking a bunch of rusty spokes and kind of regret not keeping the old one now. Also has the Ovaltech alloy crank. Centre pull cantilever brakes with alloy levers were a big feature for the time if I remember correctly. The rear brake was mounted low on the frame chainstay (edit: ACS Gripper brand). Alloy quick release seat post, alloy stem too I think (although its painted black).
It's white with some very cool smokey airbrushed paint effects on the front forks and extending up into the front of the frame. Edit: I just discovered that this smokey effect may actually have been done with the soot from a lit candle and then sprayed over the top with a clear coat (or maybe they did it whilst the clear coat was still wet?). See https://www.cycleexif.com/ricardo-mtb-tourer
There's an example of smoke painting at https://www.youtube.com/watch?v=yhXUGBPvUWw
Funny story, I was still riding it up until about 10ish years ago and towards the end of it's usable life I was riding slowly up a hill and passed a bunch of kids that lived nearby, one of them turned to me and said "That's a sh ! t bike". It cut deep but if only they knew what a classic it was. Amazes me that it's 30 years old now and still in my garage.
- P!N20
- Posts: 4055
- Joined: Thu Jul 22, 2010 6:50 pm
- Location: Wurundjeri Country
Re: Ricardo Appreciation Society
Postby P!N20 » Thu Nov 21, 2019 10:18 am
Cool bike. What was the idea with the rear brake on the chain stays? I mean, I've seen it on road and TT bikes, but surely on a mountain bike it's just going to get clogged up with mud and dirt. What was the tubing? Almost looks like a Tange 2 decal.
Funnily enough bikes like this have found favour with the post-fixie crowd of late - usually converted to beater/pub/utility bikes. Probably wouldn't take too much work to get it back into service.
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ricardo Appreciation Society
Postby singlespeedscott » Thu Nov 21, 2019 10:31 am
U brakes fell out of favor because they where heavier than cantilevers and apparently more difficult to setup, which is a load of rubbish. A well setup U-brake with decent pads performs much better than any canti lever.
-
- Posts: 2
- Joined: Wed Nov 20, 2019 2:23 pm
Re: Ricardo Appreciation Society
Postby Gravybaby » Thu Nov 21, 2019 1:30 pm
The pinkish tubing label reads: CR-MO Tubing TANGE Mountain Bike MTB P.G Tubes. The same as on this ebay listing image
-
- Posts: 1
- Joined: Mon Feb 17, 2020 1:02 pm
Re: Ricardo Appreciation Society
Postby any2wheels » Mon Feb 17, 2020 2:11 pm
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ricardo Appreciation Society
Postby singlespeedscott » Tue Feb 18, 2020 2:17 pm
Shimano uses a 2 digit coding system on their components that can be used to determine the age of your bike. Give or take a 12 months or so based on component production time versus installation onto the frame at the factory.
The codes are usually stamped on the back of the crank arms, back of the brake calipers and back of the rear derailleur.
This website has a useful list for the production date codes - http://www.vintage-trek.com/component_dates.htm
-
- Posts: 1
- Joined: Fri Jun 26, 2020 8:22 pm
Re: Ricardo Appreciation Society
Postby rileyygraham » Fri Jun 26, 2020 8:29 pm
- myzomela
- Posts: 3
- Joined: Sun Oct 04, 2020 6:19 pm
Re: Ricardo Appreciation Society
Postby myzomela » Sun Oct 04, 2020 6:56 pm
Ricardo Ridge Rider XL
I bought this new in 1989. Overhauled and powder-coated in the late 90s, after slipping off a car bike rack and getting a bad case of gravel rash
A little bit of rust is starting to peep through the green, so its time for another overhaul and respray. This time I'll go back to the original red + black. I'll try a DIY job with spray.bike paint; I've seen some decent looking results around the net. Not sure if I should use reproduction decals or stencils for the RICARDO branding - but need to decide soon!
I hope to put up the 'after' picture by the end of the year.
-
- Posts: 1
- Joined: Sun Dec 13, 2020 7:14 pm
Re: Ricardo Appreciation Society
Postby JoboMundaka » Sun Dec 13, 2020 7:17 pm
I picked up a secondhand Ricardo in beautiful condition - it had obviously had a bit restoration work done - but I’ve got no idea what model it is; it only has the Ricardo name on the frame in a few spots and an Eagle with spread wings in a shield on the front post.
Any ideas what model it might be?
Red in colour with yellow and white writing/logos.
Thanks,
Jobo.
-
- Posts: 1
- Joined: Sun Jan 24, 2021 1:00 pm
Re: Ricardo Series Z
Postby Addyplus » Sun Jan 24, 2021 1:22 pm
It has Sugino No6 Cranks. Win Alloy Handlebars and Headstem. Diacope, Dia-Compe Brakes. Soubitez Lights. Hi Tensile frame tube. 27 inch wheels.
The bike is in good original condition with Ricardo name and decals on the blue frame.
Would appreciate any information about the bike re age, type, value etc.
How can I post a picture of it?
-
- Posts: 1
- Joined: Sun Feb 28, 2021 5:22 pm
Re: Ricardo Appreciation Society
Postby Zooe » Sun Feb 28, 2021 5:36 pm
-
- Posts: 60
- Joined: Sun Oct 12, 2008 4:15 pm
- Location: Sydney
Re: Ricardo Appreciation Society
Postby b4igo » Fri Apr 09, 2021 7:07 pm
My first “real” bike was a Ricardo White Lightning with Ultegra 600 Tri Colour. I loved that bike!!! But in a moment of pure insanity I gave it away during a period I wasn’t riding several years ago.
I’d desperately love to find one again in my size (54), but would also love to see photos (as they’re hard to come by!), or meet up with anyone in Sydney who has one!
Cheers,
Mike
-
- Posts: 2
- Joined: Tue May 11, 2021 9:46 pm
Re: Ricardo Appreciation Society
Postby Ricardo21 » Tue May 11, 2021 9:59 pm
- myzomela
- Posts: 3
- Joined: Sun Oct 04, 2020 6:19 pm
Re: Ricardo Appreciation Society
Postby myzomela » Sun May 23, 2021 4:12 pm
Resprayed in original colour scheme, rebuilt and just back on the road.
I posted the "before" shot in October. The painting took ages, with many interruptions.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.